Vertical Cutting Dryer is Widely Used in Drilling Waste Management
Mud vertical cutting dryers are kinds of oil sludge dryers for treating oilfield mud, and also called vertical centrifuges from structure. They are equipped with advanced design, good handling effect and long service time. Vertical cutting dryers belong to a type of environmental protection equipment in oilfield slurry industry.

Vertical cutting dryer for drilling waste management, good performance vertical cutting dryer
Nowadays vertical cutting dryer is widely used in drilling waste management field. It’s used to do further separation for cuttings to recover valuable drilling fluids, dry solids discharge, clean return fluid and reduce mud loss. Cuttings discharged by shale shaker, desander, desilters (or mud cleaner) can be fed into the dryer’s hopper and spaced widely to the inner screens, achieving the drying and separating efficiency.

TR vertical cutting dryer in exhibition, top quality vertical cutting dryer manufacturer
Technical Data of TRCD Series Vertical Cutting Dryer
Model |
TRCD930C | TRCD930B-VFD |
Capacity(T/h) |
30-50T/h |
|
Basket Max.Diameter |
930mm |
|
Basket Gap |
0.25-0.5mm | |
Rotary Speed | 900 r/min |
0-900 r/min |
Air knife Air Inlet Pressure |
0.69Mpa | |
Air Tool Air Supply |
1.8m3/min |
|
Fuel Tank Volume |
60L |
|
Motor Power(Kw) |
55Kw | |
Oil Pump Power(Kw) |
0.55Kw |
|
Weight |
5900kg |
6000kg |
Size |
2750*2130*1800mm |
TR Solids Control is a leader in vertical cutting dryer. We are a professional manufacturer of solids control equipment in shale shaker, shaker screens, mud agitator, mud gun, mud tank, mud cleaner, decanter centrifuge, jet mud mixer, vacuum degasser, centrifugal pump, screw pump, shear pump, mud gas separator, flare ignition device. Come to us for more details!
Contact Us: Maggie Xian|Sales Manager
Sales office:No.10 West of North 2nd Ring Road Xi’an City.
Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Call:+86-13186019625
E-mail: maggie@trsolidscontrol.com
Leave a Reply