Category Archives: Post

Jet Mud Mixers for Subway Construction Site

TR Solids Control is a manufacturer of solids control equipment and drilling waste treatment in international market. After more than 10 years of continuous development, TR mud recycling system or solid control units have been operated in many drilling and construction sites. At this week, we accomplished 2pcs shear type jet mud mixers in our workshop. They will be delivered to subway construction engineering company.

Shear Type Jet Mud Mixer for Subway Construction Site

2pcs shear type jet mud mixers are completed in our workshop.

Our jet mud mixer is made of a drilling fluid shearing pump and a mud hopper, with safe, reliable performance and convenient transportation. This equipment is used to prepare or increase the total amount of drilling fluid, change the density, viscosity, water loss of drilling fluid. It is necessary to put drilling fluid materials (bentonite, barite powder, etc.) and corresponding chemical additives (polymers, etc.) into the circulation tank. However, direct input will cause a large amount of drilling fluid materials and chemical additives to precipitate or agglomerate, and dispersed or uniform drilling fluid cannot be obtained. So jet mud mixer plays an important role in this process. It could improve the quality of drilling fluids, and reduce drilling costs and drilling cycles.

Jet mud mixer for oil and gas, drilling fluid jet mud mixer

Jet mud mixers will be delivered to old customer soon.

Currently TRSLH series jet mud mixer is widely used in these industries: subway construction, trenchless HDD & tunnelling, drilling waste management, oil and gas drilling, water drilling, coal bed gas solids control system, oil mud seperation, city bored piling etc. Till now, our jet mud mixers have been exported to Russia, America, Middle East, South America, Southeast Asia, Central Asia, African, Australia, Europe etc. We welcome customers to consult our product and related service.

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com

ZJ30 Solids Control System Delivery

Solids control equipment is a component of mud purification circulation system during drilling process. Through the treatment of solids control system, it can treat the harmful substances in the mud effectively, improve mud performance, and ensure the safe and effective drilling process. Recently, 2 sets ZJ30 solids control system ordered by an oil drilling company were completed the in-plant test and package, and will contribute to oilfield drilling business soon.

ZJ30 Solids Control System Delivery

ZJ30 solids control systems were ready for delivery.

The solids control equipment ordered by our customer include: 2pcs TRZS584 shale shakers, 2pcs TRQJ200×1S-100×4N mud cleaners, 2pcs TRZCQ240 vacuum degassers, TRSB5×4-12 (22kw) 4 sets centrifugal sand pumps, 16 sets of TRJBQ7.5 mud agitators, etc. These equipment form 2 sets of ZJ30 solids control circulation systems. Usually drilling mud solids control system is composed of shale shaker, vacuum degasser, desander, desilter, decanter centrifuge, centrifugal sand pump, mud agitator, jet mud mixer, shear pump, mud gun, liquid gas separator, electronic ignition device, skid-mounted mud tank and other equipment. Generally, the number of solid control equipment is increased or decreased according to different drilling depth, and match the suitable equipment with corresponding processing capacity.

ZJ30 solids control system will be used in oil drilling field.

We exported directly or sold with supporting drillers to more than 30 countries and regions in the world such as Russia, United States, Australia, Latin America and the Middle East etc. Making sure to support first-class solid-control equipment with developing “Made-in China” as our own tasks, holding forward-looking to each task, every drawing has technicity to direct, every process has workers to follow up and every product has QC to check on. To provide customers with a full set of solid-control equipment solutions effectively is our company’s goal.

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com

Mud Desander System Delivered to Drilling Site

TR mud desander system is widely used in mini trenchless projects like horizontal directional drilling, tunnelling, city bored piling industry etc. After one-month manufacturing, TRZX-60/45 mud desander system is ready for delivering to our client’s bored piling desanding plant. Yesterday the clients came to our factory for inspection, and they were very satisfied with our equipment.

TRZX-60/45 mud desander system

TRZX-60/45 mud desander system is ready for delivery.

TRZX-60/45 mud desander system is composed of one 8” cyclone desander, one TRZS753 double-deck liner shale shaker, one TRSB 4×3-12 centrifugal pump, electrical control system, mud-storage tank, connecting pipeline, and cyclone holder. This system can improve the efficiency of urban construction, reduce labor time and labor cost, and save water. It’s the first choice in present bored pile mud recycling system.

Desanding plant for drilling, oilfield mud desander

TR mud desander system will be used in city bored piling.

TR Solids control is the main and professional mud recycling system manufacturer in China. We are an exporter of mud desander system. Our factory approvals the API certification. We will provide the high-quality mud recycling system and best service to you. In addition, we supply other solid control equipment like shale shaker, mud cleaner, decanter centrifuge, jet mud mixer, desilter, vertical cutting dryer, mud gas separator, mud gun, flare ignition devicem mud agitator and so on. Welcome your inquiry and consulting!

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com

Screw Pumps for Overseas Project

Screw pump is an ideal pump for supplying mud or slurry to decanter centrifuge in solids control industry. The main parts are screw shaft (rotor) and screw shaft bushing (stator). On July 13th, 2pcs TRG60A-150 screw pumps were finished manufacturing and commissioning in TR workshop. They are ordered by one new Colombian customer for their oilfield solid control system.

Centrifuge supply screw pump, solid control screw pump

TRG60A-150 screw pumps were completed in TR workshop.

Our TRG60A-150 screw pumps will be used for feeding slurry for client’s high speed decanter centrifuge. Flow rate is 60m3/h, and motor power is 15kw. Inlet and outlet size is the same, which sets 5 inch. Working pressure is 0.3Mpa. Our G type screw pump is based on the principle of moving meshing displacement type of the pump. It has particular advantages than other pumps to transfer the fluids with high viscosity and hard suspended particles. It is with less accessories, compact structure, small volume and easy maintenance.

TR screw pumps will be used in high speed decanter centrifuge.

TR Solids Control is a professional manufacturer of solid control system and equipment in China for more than 11 years. we will provide our client high quality products with most reasonable price. At the same time, we also sincerely offer the high level after sales service for any home or abroad clients. We still adhere to the concept of creating the maximum values and the satisfaction for our clients. To provide customers with a full set of solid-control equipment solutions effectively is our company’s goal.

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com

Shale Shaker Screens for New Customer

At the beginning of July, we completed a batch of shaker screens for new customer. They will be used on their Derrick FLC2000 shale shaker in oil drilling field. Usually shaker screen is fine mesh (single, dual or triple layered) used for filtering and separating drilling cuttings from mud(drilling fluid). It is of great importance to drilling efficiency. TR Solids Control is committed to designing high quality shaker screens to provide our clients the right screen for perfect fit at competitive price.

Polyurethane shaker screens, API PU shaker screen

Polyurethane shaker screens are sent to new customer.

As for this order, it includes 20pcs pyramid type with model number PMD48-30DX-A120 and 10pcs polyurethane type with model number TH48-30X0.15MTC. Mesh sizes of pramid shaker screen are smaller and thinner than that of the steel frame shaker screen. The fine mesh sizes maximize the solids removal capabilities of the screen. It is suitable for various types of shakers, such as linear motion shale shakers, elliptical and circular motion shale shakers. Polyurethane type screen panel is made of polyurethane sheet with high quality screen surface. This kind of screen is abrasion resistance and much longer service life than the Woven Wire Screen.

Pyramid shaker screens, oil drilling shaker screen

Pyramid shaker screens will be used in FLC2000 shale shaker.

TR shale shaker screens are available for FLC Series, Brandt VSM, Cobra Series, Swaco Mongoose and KEM-TRON shale shakers. We accept customized shale shaker screens according to client’s design. Till now, we have been the leading China OEM supplier of good quality and high performance shaker screens for over 11 years. Our shaker screen has exported to many countries like Argentina, Singapore, Egypt, Indonesia, Thailand, US, Pakistan, Dubai, Iraq, India, South Africa, Nigeria, Canada and so on.

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com

Vertical Cutting Dryer Sent to Drilling Field

Vertical cutting dryer is one of our best-selling products in the first half of the year. As the covid-19 is in under control in China, and international oil prices are rising slowly, our domestic drilling industry has improved in this year. The number of wells increases a lot. In these days, TR vertical cutting dryer has been recognized and praised highly from many drilling companies. On June.28th, new TRCD930C dryer has sent to drilling field again to serve drilling waste management.

TRCD930C vertical cutting dryer, solid control dryer

Vertical cutting dryer has sent to oil drilling field.

Vertical cutting dryer is one of the core equipment for drilling waste management. It is often used for oil-based mud to dry solids discharge, clean return fluid, and reduce mud loss. Generally, the oil content of oil-based mud is about 20% before vertical cuttings dryer is processed. After treatment, the oil content of drilling cuttings can be reduced to less than 5%. TR Solid Control is an enterprise with independent research and development of vertical cutting dryer. After continuous improvement, our dryer is more suitable for various complicated working conditions, with good use effect and long service life. Currently TRCD series vertical cutting dryer has been widely used in major domestic and overseas oil fields.

Vertical cutting dryer for drilling waste management

TRCD930C vertical cutting dryer will be used in drilling waste management.

TR Solids Control is a well-known manufacturer of vertical cutting dryer in China for over 10 years. Our dryers have been exported to Russia, America, Middle East, South America, Southeast Asia, Central Asia, African, Australia, Europe etc. Besides, our other solid control units are widely used in oil and gas drilling, coalbed methane drilling, geothermal drilling, trenchless horizontal directional crossing, pipe jacking, shield tunneling, piling and other projects, tailings treatment, river dredging and other fields. If you want more information, please contact us!

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com

Mud Agitators for Malaysia Drilling Company

It is during a rush season and the work in our factory is in a more busy period lately. At the beginning of this week, our workers finished 5pcs TRJBQ7.5 horizontal mud agitators in the workshop. They are matched with explosion-proof control cabinets for each piece as a whole set. These are purchased by our new Malaysian customer for their horizontal directional drilling field. Later they will arrange the pickup to the sea port.

TRJBQ7.5 mud agitators, drilling fluid mud agitator

5pcs TRJBQ7.5 horizontal mud agitators will be delivered.

Although the price of motor and gearbox on mud agitators have risen a lot at this year, we adhere to strict production philosophy, and continue to provide customers with high-quality mud agitators. Our TRJBQ7.5 mud agitators are completed with 2pcs blades with blade diameter 650mm. Blade speed is 60/72 r/min. Currently we can manufacture mud agitator with worm and wheel gearbox, also the agitator with helical bevel gear box is available. The latter one will transfer more efficient to shaft, which saves more energy than common worm and wheel gearbox. No matter for horizontal or vertical mud agitator, there is helical bevel gearbox available.

Mud agitator for HDD, horizontal mud agitators

Mud agitators will be used in Malaysia HDD Company.

TR Solids Control is a professional manufacturer for solids control equipment in China. We have designed lots of high-quality products, and JBQ series mud agitator is one of them. To keep both mud uniformity and suspension of solids, mud agitator is used to agitate the mud consecutively and reliably. Till now, our mud agitators have been exported to Russia, America, Middle East, South America, Southeast Asia, Central Asia, African, Australia, Europe etc. We sincerely welcome friends from all over the world to visit our factory and guide our work.

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com

VFD Decanter Centrifuge Shipped to Oilfield Site

Decanter Centrifuge is a normal centrifuge mode of our company, it’s ideal choice for separating particles in drilling mud. According to the different frequency, decanter centrifuge can be divided into fixed frequency centrifuge and variable frequency centrifuge. On June.16th, one piece VFD type TRLW355NB-1 decanter centrifuge was completed the final inspection and package in TR factory. It will be for new customer to support their oil drilling process.

TRLW355NB-1 decanter centrifuge, drilling fluid mud centrifuge

TRLW355NB-1 decanter centrifuge will be sent to client.

Compared to fixed frequency centrifuge, variable frequency centrifuge is much flexible. It can be adjusted the speed of both bowl and gear box as per client’s needs. It has better energy saving, and higher economic efficiency. The bowl speed of our TRLW355NB-1 decanter centrifuge ranges from 0 to 3200 r/min, and gear speed ranges from 0 to 30 r/min. The capacity can reach 40m3/h. Main motor power is 37kw, meanwhile auxiliary moor power is 7.5kw. TRLW series decanter centrifuge can meet with different requirements of mud treatment under various drilling conditions.

VFD Decanter Centrifuge, solid control centrifuge

VFD Decanter Centrifuge is shipped to oilfield site.

TR Solids Control is a lead and professional manufacturer of decanter centrifuge with rich experience in international market. Our decanter centrifuge is high in recovery rate, effective in solids control and remarkable in the reduction of cost spent on drilling mud resupplying and management. Separation point of our decanter centrifuge can meet as fine as 2~7 microns. If you want to know more about TR decanter centrifuge, welcome to contact our team. In our company,  you can get your desired goods with the best prices and good quality.

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com

Solid Control Spare Parts for Foreign Client

For our solid control equipment such as shale shaker, mud cleaner, desander, desilter, some spare parts are needed to be replaced at fixed period. At present, we could supply many spare parts for Derrick FLC500, FLC2000 series, Mi Swaco Mongoose shale shaker and mud cleaner. At last week, we finished the production and package of shale shaker and mud desander spare parts in our workshop. They have delivered to foreign client by air.

Spare parts for mud desander, 12" desander cyclone

12″ desander cyclones and other spares will be shipped soon.

Regarding this order, it mainly includes 3pcs 12” desander cyclones, gauge, manifold inlet, manifold outlet for Swaco 2-12 D-Sander. Also includes hex head screws, hex nuts, lock washes, cable glands for Mongoose shale shaker. They are shipped together for one customer in Africa. In addition to these spare parts, we also provide shaker screens, float mount assy, channel protector, side support assy, cross support assy, lifting device, 10” desander cylone, 4” desilter cyclone for both Derrick and Mongoose shaker and mud cleaner.

Shale shaker spare parts, shaker hex head screws

Shale shaker spare parts are popular by customers.

TR Solids Control is a professional manufacturer of mud solids control equipment and drilling waste treatment systems integrating product development, production and sales in China for over 11 years. Our solid control equipment and relevant spare parts have been exported to Russia, America, Middle East, South America, Southeast Asia, Central Asia, African, Australia, Europe etc. All of customers are satisfied with the quality and performance. Please contact us freely for any question or interest.

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com

Mud Desilter Exported to Singapore

Mud desilter is the third class equipment in the whole solids control system. It is used to separate the solid particles whose diameter is 15-44μm from drilling fluid. TRCN series desilter can be adjusted to control the handling capacity to match the different requirements. On May. 31th, one new set TRCN100-4N mud desilter was transported to the port for delivery. It will be shipped to our new Singapore customer in oilfield industry.

Mud desilter for oil and gas, solid control mud desilter

New mud desilter will be shipped to our new Singapore customer.

Processing capacity of this desilter is 60m3/h with 4pcs 4” cyclones installed. Its inlet size is DN100mm and outlet size is DN125mm. Working pressure is 0.25 to 0.4Mpa. Bottom shaker adopts our mini model TRZS60 with one motor. This is our smallest model desilter for small scale mud treatment system. Our mud desilters have advantages of large handling capacity, high separation ability and convenient operation. They are widely used in petroleum drilling and HDD (Horizontal directional drilling), city bored piling etc.

TRCN100-4N mud desilter, drilling fluid mud desilter

TRCN100-4N mud desilter was transported to the port for delivery.

TRCN series mud desilter conforms to both API & ISO international standard. Till now, we have exported to many countries like Vietnam, Egypt, Germany, UAE, US, Middle East, Singapore, Malaysia, Australia, Canada, UK, South Africa etc. In addition, we manufacture other solid control equipment like shale shaker, mud cleaner, decanter centrifuge, jet mud mixer, desander, vertical cutting dryer, centrifugal pump, mud gas separator, flare ignition device and so on. We welcome your inquiry!

 

Contact Us: Maggie Xian|Sales Manager
Sales office: No.10 West of North 2nd Ring Road Xi’an City.
Factory Add.: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel:+86-29-86332919
Mob.:+86-13186019625
E-mail: maggie@trsolidscontrol.com

Web: www.trsolidscontrol.com

www.drillingmud-system.com