Tag Archives: Mud separation unit
Mud Recovery System in Microtunneling Construction
Microtunneling (MT) is a method of installing pipes below the ground, by jacking the pipe behind a remotely-controlled, steerable, guided, articulated microtunnel boring machine (MTBM). The MTBM, which is connected to and followed by the pipe being installed, ensures that the soils being excavated are fully controlled with the rate of advancement of the boring machine at all times.
Mud recovery system in microtunneling construction, drilling fluids solids control system
Mud recovery system is supporting facilities that TR develops for the environmental protection of drilling mud treatment during microtunneling construction. By using shale shaker, desander, desilter or mud cleaner, shear pump and other solids control equipment, we achieve the purpose of purification and reuse of drilling waste sludge, which promotes the rapid and efficient progress of microtunneling construction. Through this system, waste mud can be recycled and used. This saves the cost for users, improves the economic benefit of customers, protects the drilling rig, at the same time protects the surrounding environment from pollution.
Mud cleaning system, shield mud recycling system, shale shaker, mud desander
TR Solids Control is a professional manufacturer to supply mud treatment solutions in microtunneling construction. Besides this, we also supply mud recovery system in oil & gas drilling, horizontal directional drilling, bored piling and drilling waste management. We are sincerely welcome you to visit our factory and check our facilities.
Contact Us: Maggie Xian|Sales Manager
Sales office：No.10 West of North 2nd Ring Road Xi’an City.
Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel：+86-29-86332919
Call：+86-13186019625
E-mail: maggie@trsolidscontrol.com
Oil-Based Drilling Waste Management
In order to implement and follow environment requirements, TR Solids Control developed a set of drilling waste management independently. This system makes the mud pit disappear completely, and can realize harmless treatment during drilling. TR team has made our own contribution to environmental protection.
Oil-based drilling waste management, liquids solids separation, DWM manufacturer
Our oil-based drilling waste management is mainly divided into waste drying collection unit, liquid phase separation unit. As for disposal of waste mud, we need to add gel breaker processing unit.
1.Thermal Washing Facility
In this process, thermal washing facility will be injected into a certain percentage of hot water. Then we transport oil-base mud drilling cuttings to the thermal washing facility with screw conveyor. The oil from the drilling cuttings off in the stirring of mixer continuously. At this time, the thermal washing facility completes this process.
2. Waste Drying Collection Unit
In this process, we transport the drilling cuttings treated by solids control equipment to high-frequency vertical cutting dryer with screw conveyor. After dryer treating, large particles of drilling cuttings in solids control equipment are separated and stripped.
(Solid-phase water content can be controlled within 10%) Drilling waste cuttings are collected and transported timely to the lower tank for caching and pre-treatment.
3. Liquid Phase Separation Unit
In this process, we transport the mud filtered by vertical cutting dryer to variable-frequency high speed centrifuge through industrial pump(screw pump) of the centrifuge for deep separation. After treatment, solid phase separated is collected, and liquid phase will be transported to drilling fluids circulating system for recovery through sand pump.
Mud circulating system, oil sludge treatment system, solids control unit
As a main and well-known manufacturer of solids control equipment and drilling waste management, TR Solids Control always put customers’ requirement in the first place. If you have any inquiry about shale shaker, shaker screen, mud cleaner, desilter, desander, mud agitator, jet mud mixer, decanter centrifuge, centrifugal pump, shear pump etc, welcome to contact us freely. TR will provide our best price and service to you.
Contact Us: Maggie Xian|Sales Manager
Sales office：No.10 West of North 2nd Ring Road Xi’an City.
Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel：+86-29-86332919
Call：+86-13186019625
E-mail: maggie@trsolidscontrol.com
